Skip to content
Bransford Media

LUTs & resources

Panasonic LUMIX S1 II LUTs

Camera settings

  • Photo Style > V-Log (built in); Dual Native ISO 640 / 5000 in V-Log; with Dynamic Range Boost ON V-Log ISO 1000-25600
  • ARRI LogC3: paid key DMW-SFU3A, firmware Ver.1.1 (Jun 2025) or later; LogC3 dual native ISO 500 / 4000
V-Log / V-Gamut conversion preview
Neutral color before the creative look
NeutralLook

V-Log / V-Gamut

Shot on Sony FX30 (S-Log3) and re-encoded into V-Log / V-Gamut to show the conversion.

V-Log / V-Gamut

Built from Panasonic's published spec; not yet tested on footage from this camera. If blacks look lifted or crushed, check the clip's data levels.

Download free conversion LUTInstallation guides
ARRI LogC3 (EI 800) / AWG3 conversion preview
Neutral color before the creative look
NeutralLook

ARRI LogC3 (EI 800) / AWG3

Shot on Sony FX30 (S-Log3) and re-encoded into ARRI LogC3 (EI 800) / AWG3 to show the conversion.

ARRI LogC3 (EI 800) / AWG3

Built from ARRI's published spec and checked against ARRI's own LUT.

Download free conversion LUTInstallation guides

Sources

V-Log dual native 640/5000; DR Boost ON 1000-25600; LogC3 500/4000 with DMW-SFU3A; 14+ stops, 15 with DR BoostAnnounced 2025-05-13; up to 15 stops in V-Log with DR Boost; ARRI LogC3 via DMW-SFU3A (firmware 2025)Ver.1.1 (2025-06-24): ARRI LogC3 added to Photo Style after activationDMW-SFU3A required; S1M2 Ver.1.1 or laterPanasonic official V-Log to V-709 LUT download (VLog_to_V709_forV35_EN.zip)